New analog products for December



Analog Connection

December 2015
Your monthly update of new Analog products from TI


Texas Instruments

To subscribe to the TI Analog Connection eNewsletter, please click here.
To subscribe to the Analog Applications Journal please click here.
divider


Power Management
8-A Synchronous boost converter with adjustable output current limit
The TPS6123x is a high current, high efficiency synchronous boost converter with constant output current feature for single cell Li-Ion and Li-polymer battery powered products, in a wide range of power bank, tablet, and other portable devices.

  • Small RDSon (12mΩ/12mΩ) provides high efficiency and less thermal issue
  • Inactive status indication supports Always-On application
  • Applications: Power bank, smartphone/ tablet, USB charging port
TPS61235: Product info, datasheet
divider
Ultra low-noise, 300-mA linear regulator for RF/ analog circuits
The LP5910 is a linear regulator capable of supplying up to 300 mA of output current. Designed to meet the requirements of RF and analog circuits, this device provides low noise, high PSRR, low quiescent current, and superior line transient and load transient response.

  • Low noise (20uVrms) for noise sensitive rails
  • 0.7x0.7mm DSBGA package saves board space and fits space constrained applications
  • Applications: Smart watch, wearables for first responders, ECG electrocardiogram, heart monitors & pedometers, set-top box (STB), smartphone (cameras)
LP5910: Product info, datasheet
divider
Zero Iq reverse polarity protection smart diode controller
The LM74610-Q1 is a controller device that can be used with an N-Channel MOSFET in a reverse polarity protection circuitry.

  • No quiescent current (zero Iq) provides long battery life
  • Fast response to dynamic current reversal (2 µs) allows usage in battery ORing with minimum reverse current flow
  • Applications: ORing of redundant battery power supply, advanced driver assistance system, infotainment system, battery power tools; body control module & gateway (BCM)
LM74610-Q1: Product info, datasheet
divider
Zero Iq smart diode rectifier controller with 70uA gate drive
The LM74670-Q1 is a controller device that can be used with an N-Channel MOSFET in full or half bridge rectifier architectures for alternators.

  • No quiescent current (zero Iq) provides long battery life
  • Able to handle 24V AC signal up to 300Hz frequency allowing for usage in automotive alternator and industrial 12/24V rectifiers
  • Applications: ORing of redundant battery power supply, automotive regulator rectifier systems, 12/24V AC LED drivers (MR16, A19), 12/24V AC rectifiers, advanced driver assistance systems (ADAS), battery powered power tools
LM74670-Q1: Product info, datasheet
divider
Wireless power transmitter for 5VIN
The bq500511 is a wireless power transmitter controller that, when combined with the bq50002 analog front end device, integrates all functions required to create a Qi-compliant or proprietary 5-V transmitter.

  • WPC1.2 Specification compatibility simplifies development of a fully compliant solution to work with all existing and future WPC parts
  • Two-chip solution with dedicated digital and analog components is cost effective and efficient (>75%)
  • Applications: Factory & building automation; motor control, UPS, solar inverters; process control; telecom supplies and medical equipment; distributed supplies; precision instruments
BQ500511: Product info, datasheet
divider
USB Charging port controller
The TPS2549-Q1 device is a USB charging port controller and power switch with a current-sense output that is able to control an upstream supply.

  • Current sense output supports cable droop compensation allowing for high charging currents despite long, resistive USB cables
  • Handshaking modes support fast charging of all popular phones, smartphones and tablets
  • Applications: Automotive USB ports, automotive infotainment systems
TPS2549-Q1: Product info, datasheet
divider
3-A High efficiency step-down converter
The TLV62085 device is a high-frequency synchronous step-down converter optimized for small solution size and high efficiency.

  • DCS-Control™ topology maintains an accurate output voltage through a fast AC line and load transient response and a seamless transition into power save mode
  • Hiccup short circuit protection prevents devices from drawing excessive current from the battery or input voltage rail
  • Applications: General purpose POL regulator, system power rail voltage conversion, battery powered portable devices, embedded computing/ motherboard/ servers, solid state drives/ access point router, gaming/ ultrabook/ set top box
TLV62085: Product info, datasheet
divider
-20 V P-channel NexFET power MOSFET
This -20 V, 5.5 mΩ NexFET power MOSFET is designed to minimize losses in power conversion load management applications with a SON 3.3 mm x 3.3 mm package that offers an excellent thermal performance for the size of the device.

  • Low drain to source On-Resistance minimizes switching losses in power conversion applications, extending battery life
  • 18 A continuous drain current supports higher current applications
  • Applications: Tablet: multimedia, server motherboard, notebook PC
CSD25404Q3: Product info, datasheet
Amplifiers and Linear
80MHz, Ultra-low distortion, high-precision, dual channel, 16-Bit and 18-Bit ADC drivers
The OPAx625 family of operational amplifiers are excellent 16-bit and 18-bit, SAR ADC drivers that are high precision with low THD and noise allow for a unique power-scalable solution.

  • Ultra-fast mode transition time (170ns from low-power to high-drive at 16-bit ENOB) makes it ideal for high-speed, high-resolution power-sensitive applications
  • Ultra-low THD+N along with excellent DC precision enables high precision front end circuit
  • Applications: Test and measurement, data acquisition systems, programmable logic controllers
OPA2625: Product info, datasheet
divider
Haptic driver for ERM and LRA with built-in library and smart loop architecture
The DRV2605L-Q1 device is an automotive haptic driver that includes a haptic-effect library and provides a closed-loop actuator-control system for high-quality tactile feedback for ERM and LRA.

  • Integrated Immersion-licensed haptic effect library eliminates the need for waveform development with no separate IP license required
  • Smart loop architecture provides consistent acceleration over environmental conditions and optimized start/stop times
  • Applications: Automotive body solution, advanced driver assistance systems (ADAS)
DRV2605L-Q1: Product info, datasheet
Data Converters
18-Bit, 2-MSPS, 15-mW, SAR ADC with multiSPI
The ADS9110 is an 18-bit, 2-MSPS, successive approximation register (SAR) analog-to-digital converter (ADC) with ±0.5-LSB INL and 100-dB SNR specifications under typical operating conditions.

  • Best-in-class linearity ( ±0.5 LSB INL, ±0.4 LSB DNL) enables fast and precise control loop
  • Best-in-class noise and distortion (100 dB SNR, -118 dB THD) reduces oversampling and filtering requirements
  • Applications:Test and measurement, motor control, medical imaging, factory automation & control
ADS9110: Product info, datasheet
divider
Dual-channel, 14-bit, 1.0-GSPS analog-to-digital converter
The ADS54J40 is a low-power, wide-bandwidth, 14-bit, 1.0-GSPS, dual-channel, analog-to-digital converter (ADC).

  • Dual channel 14-bit ADC supports applications requiring best noise performance and signal processing bandwidth
  • 1GSPS Sampling rate and best performance 14-bit ADC provides best noise floor and SNR for data processing
  • Applications: Radar and antenna arrays, CMTS/ DOCSIS 3.1 receivers, communications test equipment, microwave receivers/ SDR, digitizers in test and measurement, broadband wireless
ADS54J40: Product info, datasheet
divider
24-bit, 30kSPS, 4-Ch, industrial ADC with integrated PGA in QFN package
The ADS1257 is a low-noise, 30-kSPS, 24-bit, delta-sigma (ΔS) analog-to-digital converter (ADC) with an integrated multiplexer, input buffer, and programmable gain amplifier (PGA) in a small 20-pin, 5-mm x 5-mm VQFN package.

  • Up to 23 bits of noise-free resolution allows for accurate conversion of very small signals
  • Very small package (5mm x 5mm VQFN-20) is ideal for the most space-constrained designs
  • Applications: Grid communications modules - power line communications, factory automation & control, distributed & remote I/O modules, test equipment, medical equipment, strain gauge digitizers
ADS1257: Product info, datasheet
Interface
Two-port USB 2.0 480Mbps hub
The TUSB4020BI is a two-port USB 2.0 480Mbps hub. It provides USB high-speed/full-speed connections on the upstream port and provides high-speed, full-speed, or low-speed connections on the two downstream ports.

  • Driver free operation provides simplified implementation and use
  • Supports USB battery charging eliminating the need for an extra chip for charging
  • Applications: Computer systems, docking stations, monitors, set-top boxes
TUSB4020BI: Product info, datasheet
divider
Four-port USB 2.0 480Mbps hub
The TUSB4041I device is a four-port USB 2.0 480Mbps hub. The device provides USB high-speed or full-speed connections on the upstream port.

  • Driver free operation provides simplified implementation and use
  • Supports USB battery charging eliminating the need for an extra chip for charging
  • Applications: Computer systems, docking stations, monitors, set-top boxes
TUSB4041I: Product info, datasheet
divider
Type-C configuration channel logic and port control
The TUSB320LA is a third generation Type-C configuration channel logic and port controller. The TUSB320 devices use the CC pins to determine port attach and detach, cable orientation, role detection, and port control for Type-C current mode.

  • USB Type-C specification v1.1 compliant
  • Supports up to 3A of current advertisement and detection for fast charge function on cell phone applications
  • Applications: Mobile phones, tablets and notebooks, DFP/UFP/DRP application
TUSB320LAI: Product info, datasheet
divider
Low power 28 Gbps 8-channel linear repeater
The DS280BR810 is an extremely low-power, high-performance eight-channel linear equalizer supporting multi-rate, multi-protocol interfaces up to 28 Gbps.

  • Ultra low ( < 100mw/ch) power consumption eliminates the need for added heat sinks allowing ICs to be mounted on either side of the PCB and in limited airflow locations
  • 13x8mm BGA with pin-compatible retimer provides a scalable portfolio allowing flexible cost and performance options
  • Applications: 100GbE and 25GbE enterprise switching, IP/ optical router, other wired comms
DS280BR810: Product info, datasheet
divider
Extended temperature gigabit ethernet PHY with SGMII
The DP83867 is a robust, low power, fully featured Physical Layer transceiver with integrated PMD sublayers to support 10BASE-Te, 100BASE-TX and 1000BASE-T Ethernet protocols.

  • Gigabit Speed provides better real-time performance of standard/IEEE Ethernet
  • Large temperature range for commercial, industrial, or extended temperature applications
  • Applications: Human machine interface (HMI), PLCs, distributed and remote I/O modules, machine vision: camera, servo drives & motion control
DP83867E: Product info, datasheet
divider
Low power & small package gigabit ethernet PHY (DP83867CS with SGMII)
The DP83867 is a robust, low power, fully featured physical layer transceiver with integrated PMD sublayers to support 10BASE-Te, 100BASE-TX and 1000BASE-T Ethernet protocols.

  • Gigabit Speed provides better real-time performance of standard/IEEE Ethernet
  • Large temperature range for commercial, industrial, or extended temperature applications
  • Applications: Human machine interface (HMI), PLCs, distributed and remote I/O modules, machine vision: camera, servo drives & motion control
DP83867CR: Product info, datasheet
divider
Gigabit ethernet PHY customized for harsh industrial environments (DP83867IS with SGMII)
The DP83867 is a robust, low power, fully featured physical layer transceiver with integrated PMD sublayers to support 10BASE-Te, 100BASE-TX and 1000BASE-T Ethernet protocols.

  • Gigabit Speed provides better real-time performance of standard/IEEE Ethernet
  • Large temperature range for commercial, industrial, or extended temperature applications
  • Applications: Human machine interface (HMI), PLCs, distributed and remote I/O modules, machine vision: camera, servo drives & motion control
DP83867IS: Product info, datasheet
divider
Automotive dual UART with 64-byte FIFO
The TL16C752CI-Q1 is a dual universal asynchronous receiver transmitter (UART) with 64-byte FIFOs, automatic hardware and software flow control, and data rates up to 3 Mbps.

  • Up to 3Mbps(5V), 2Mbps(3.3V), 1.5Mbps (2.5V) and 1Mbps(1.8V) provides compatibility with high speed processors
  • TI patented programmable auto-RTS and auto-CTS reduces software overload and increases system efficiency
  • Applications: GPS systems, Ethernet switch, infrared transceivers, domestic applications, portable applications, factory automation & control
TL16C752CI-Q1: Product info, datasheet
divider
6 Gbps TMDS retimer
The TMDS181x is a digital video interface (DVI) or high-definition multimedia interface (HDMI) retimer.

  • Supports 4k2k60p and up to WUXGA 16-bit color depth or 1080p with higher refresh rates allowing higher resolutions and improved video quality
  • 6Gbps Retimer function cleans up random jitter in the system
  • Applications: Digital TV: monitors, digital projector, audio/video equipment, Blu-ray DVD, desktops/ all-in-ones, active cables
TMDS181: Product info, datasheet
divider
USB Type-C configuration channel logic and port control with VCONN
The TUSB322I device enables USB Type-C ports with the configuration channel (CC) logic required for Type-C ecosystems.

  • USB Type-C specification v1.1 compliant
  • Supports up to 3A of current advertisement and detection for fast charge function on cell phone applications
  • Applications: Host, device, dual role port applications, mobile phones, tablets and notebooks, USB peripherals
TUSB322I: Product info, datasheet
Sensor Products
Fully integrated precision fluxgate magnetic field sensor and readout
The DRV425 is designed for single-axis magnetic field-sensing applications and enables electrically-isolated, high-sensitivity, and precise dc- and ac-field measurements.

  • Highly sensitive and precise integrated fluxgate sensor allows measurement of small magnetic fields and field gradients
  • High gain accuracy eliminates the need for gain calibration over temperature due to superior gain error and drift
  • Applications: Position sensing, torque measurement for motor drives, magnetic compass, isolated current sensing, magnetic field sensing/ metal sensing
DRV425: Product info, datasheet
Motor Drivers
1.5A Stepper motor driver with 1/16 microstepping and integrated current sensing (STEP/DIR Ctrl)
The DRV8885 is a stepper motor driver for industrial equipment applications. The device has two N-channel power MOSFET H-bridge drivers, a microstepping indexer, and integrated current sense.

  • Simple STEP/DIR control interface supports accurate and smoother operation from half-step up to 1/16 microstepping on-chip without support from the system controller
  • Integrated current sensing eliminates the need for two external sense resistors, saving board space and BOM cost
  • Applications: 24V Stepper motor applications, multi function printers, 3D printers, textile equipment, currency counter
DRV8885: Product info, datasheet
divider
Dual brushed DC gate driver (PWM ctrl)
The DRV8704 is a dual-brushed motor controller for industrial equipment applications. The device controls external N-channel MOSFETs configured as two H-bridges.

  • 8 to 52V Supply voltage supports 12V and 24V motors with the ability to drive eight external FETs
  • Simple PWM control interface allows for matching to legacy designs or control with a single PWM
  • Applications: Currency counter, office automation machines, factory automation & control, textile machines
DRV8704: Product info, datasheet
Isolation
Automotive, low power, quad-channel 4/0 and 3/1 digital isolators
The ISO734x-Q1 family of devices provides galvanic isolation up to 3000 VRMS for 1 minute per UL 1577 and 4242 V
PK per VDE V 0884-10.
  • 6kV pk Surge isolation rating provides higher tolerance to electro fast transient (EFT) bursts
  • Low power consumption (1mA per channel at 1 Mbps, 2.1mA per channel at 25Mbps @ 3.3V) allows longer battery life and lower cost
  • Applications: Automotive battery management systems, EV/ HEV AC, automotive fan drivers, automotive ECU, EV/ HEV on-board charger
ISO7340-Q1: Product info, datasheet
TI Technical Blogs
Precision Hub
Tips, tricks and techniques from TI precision analog experts.
 •
 •

Power House
Technical solutions, industry trends and insights for designing and managing power supplies
 •
 •

Analog Wire
Learn analog signal chain solutions to real-world problems:
 •
 •

Fully Charged
The latest power trends for battery-powered designs
 •
 •

Motor Drive & Control
Read about how TI spins motors smarter, greener and safer.
 •
 •

Behind the Wheel
Drive in to see how TI is engineering the future of automotive.
 •
 •


Industrial Strength
The latest from TI experts on our innovative industrial systems designs and solutions.
 •
 •
New Literature and Videos
Application Notes:
 •
 •
 •
 •
 •
 •
Selection & Solution Guides:
 •
 •
 •
 •
White Papers:
 •
Videos:
 •
 •
 •
 •
 •
 •
 •
 •
 •
TI Designs – Reference Design Library
Jump start your system design and speed time to market with TI Designs, a library of comprehensive reference designs created by experts with deep system and product knowledge. These design span TI's portfolio of analog, embedded and connectivity products. Find the full library at ti.com/tidesigns. Check out our latest reference designs:
 •
 •
 •
 •
 •
 •
 •
 •
 •
 •
 •
 •
Company – Authored Articles in the Media
 •
"Power module or discrete power solution: What's best for your design?," by Chris Glaser. Electronic Design. August 2015.
 •
"Power Tips: Selecting synchronous rectifiers in isolated supplies," by Brian King. EETimes/ Power Management. August 2015.
 •
"Power Tips (09): Voltage mode vs current mode: Choosing the best control method," by Robert Taylor. EETimes/ Power Management. August 2015.
Customer Support Contact Information
Visit TI's E2E™ Community and interact with your peer engineers, TI engineers, and other experts in order to ask questions, share knowledge, explore ideas, and help solve problems.
Product Information Centers
 •
 •
 •
 •
To subscribe to the TI Analog Connection eNewsletter, please click here.
Also, you can subscribe to my.ti news here.
Google Play
App Store
TI Mobile
E2E
Facebook
Twitter
LinkedIn
myTI
Subscribe

Postagens mais visitadas deste blog

Programação de um CLP: Modos de programação

The Mystery of USB Chargers

Subwoofer Repair